Driver Board Install Instructions
System 80, 80A, 80B
E-mail us if you have questions about the installation instructions.
Copyright 2016 the Boston Pinball Company
Disclaimer...The Boston Pinball Company L.L.C can not be held responsible for damage to your machine as a result of our products. Our products have been tested on many, but not every machine represented on these pages. The assumption is made that your System 1 or System 80 Gottlieb Pinball Machine reflects the design documentation available in the original Gottlieb manuals and technical documents. Your are responsible to make sure your machine is in working order and reflects them before installing our products. We gladly accept returns on our products, but any damage to our products as a result of an improperly wired or malfunctioning machine will result in a refund that is prorated based on damage. We are not responsible for typographical errors on these pages.
(We welcome any comments about errors found.)
All material on this website © Copyright of the Boston Pinball Company (unless otherwise noted) All rights reserved. The materials in this site are provided “as is” and without warranties of any kind either express or implied.
We will gladly try to assist you in a problem you are having with your machine before you decide to try our products.
Just e-mail us at; support @ boston pinball company . com ( no spaces in the address )
The Boston Pinball Company L.L.C. has no association with Gottlieb, Bally, Williams, Sega, Stern, Innovative Concepts in Entertainment or any other manufacturer listed on our website. Gottlieb® is a trademark of Gottlieb Development LLC. CHEXX™ and SUPER CHEXX™, ICE® are the property of I.C.E. Inc.